- This topic has 8 replies, 4 voices, and was last updated 12 years, 4 months ago by
.
-
Posts
-
Fd 8902 00118
Hi everyone
Got one of these with an e24 ( drain fault ). It’s draining perfectly well and the machine is one of the cleanest I’ve come across but more and more it’s throwing up this fault
Have checked all the obvious, any ideas would be appreciated
Andy
Sent from my iPad using Tapatalk HDRe: Bosch dw. Sms63eo9gb/07
I’ll give it a go. Thanks Martin, strange one though as it always pumps out no problem
Sent from my iPad using Tapatalk HDRe: Bosch dw. Sms63eo9gb/07
The pumps are a bit iffy and prone to this error as the module controls it directly. Once the resistance increases then in throws up this error. Best option = stick a new pump in.
Re: Bosch dw. Sms63eo9gb/07
Word of warning. A duff heat pump or blocked non-return valve can also throw up this fault code. If the fault code appears at the beginning , approx 2/3 mins after starting , and the machine doesn’t actually get going then it could be the heat pump.
Saying that , I had one 2 weeks ago with Intermittent e24 and it turned out to be a blockage in the drain hose/sink connection causing slow draining.Re: Bosch dw. Sms63eo9gb/07
That’s exactly what happens. About 2 mins in the fault code comes up, reset it try again and it may or may not work. Never have trusted fault codes 🙂
Sent from my iPad using Tapatalk HDRe: Bosch dw. Sms63eo9gb/07
I also had an Int E24 on one of these, turned out to be fine thread of string wrapped round spindle of pump, could hardly see it. The customer was a dentist and she had these fine barbed, flexible files for root canal work! Did the trick. Hope this post works this is the third time i’ve tried this?
- You must be logged in to reply to this topic.