WMH148DF Tripping on spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WMH148DF Tripping on spin

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 28, 2013 at 5:14 pm #78369
    Profyaffle
    Participant

    Washing machine tripping on spin. Washes fine but on the spin it’s tripping. Megga’d out ok even through the motor. Brushes 40{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} left on them. Heater was replaced recently but again tested fine. All other components tested fine for insulation too. Any advice would be appreciated

    Chris

    November 28, 2013 at 5:21 pm #405403
    Andy jones
    Participant

    Re: WMH148DF Tripping on spin

    May be worth sticking a new set of brushes in and cleaning the armature, possibly arcing and causing it to trip


    Sent from my iPad using Tapatalk HD

    November 28, 2013 at 5:26 pm #405404
    jamieparrie
    Participant

    Re: WMH148DF Tripping on spin

    hello.it will be motor.check earth loop readings when spining.guarate they go too high for the rcd.
    jamie

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.