Siemens WT46E385 not starting

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Siemens WT46E385 not starting

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 29, 2013 at 10:16 am #78381
    don
    Moderator

    Don’t get these very often in for repair can anyone help please 🙂

    Guys in the workshop have a Siemens WT46E3GB/30 FD 9110 condenser dryer, select any programme, press start, machine beeps twice without starting or heating.


    Ta

    Don

    November 29, 2013 at 11:49 am #405438
    Martin
    Participant

    Re: Siemens WT46E385 not starting

    It’s not below 5C in that workshop now is it? Just a thought. Also door switch OK?

    November 29, 2013 at 12:07 pm #405439
    don
    Moderator

    Re: Siemens WT46E385 not starting

    Hi Martin

    Temp well above 5c, interlock and door switch both okay.


    Don

    November 29, 2013 at 8:36 pm #405440
    nomadPaul
    Participant

    Re: Siemens WT46E385 not starting

    Does it make the same beeps if you start it with the door open ? ? still be looking at door lock personally .

    November 30, 2013 at 8:52 am #405441
    don
    Moderator

    Re: Siemens WT46E385 not starting

    Same two beeps with the door open, will get the guys to go back to door lock on Monday.

    Thanks

    Don

    December 3, 2013 at 8:55 am #405442
    don
    Moderator

    Re: Siemens WT46E385 not starting

    Just to update which may help others in the future 🙂


    You were spot on nomadPaul door lock was faulty.


    Thanks again


    Don

    December 3, 2013 at 9:38 am #405443
    Martin
    Participant

    Re: Siemens WT46E385 not starting

    Deep joy! 😉

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.