Beko DV555 switch change.

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Beko DV555 switch change.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 1, 2013 at 3:28 pm #78407
    *AL*
    Participant

    Hi, I’ve just changed the Oven switch on our Beko DV555 but in the process of removing the switch panel a couple of wires have become dislodged.

    One is blue, one is brown, they both have a spade connector on the end which is still connected to a switch, but they both have another spade connector 4/5 inches from the end, these are the connectors that have come adrift.

    Any suggestions ?

    December 1, 2013 at 3:52 pm #405539
    Martin
    Participant

    Re: Beko DV555 switch change.

    Blue being the neutral connection and brown the live I would imagine? Blue to blue, brown to brown the most likely solution.

    December 1, 2013 at 4:11 pm #405540
    *AL*
    Participant

    Re: Beko DV555 switch change.

    Martin, I think the wires piggy back between the 2 switches, but we’re unsure of which terminals they connect to ?

    He’s a photo showing the 2 wires.

    http://i1054.photobucket.com/albums/s48 … G_2442.jpg

    December 1, 2013 at 4:23 pm #405541
    Martin
    Participant

    Re: Beko DV555 switch change.

    Ooooh dear, I see your problem. Sorry but I do not have a wiring diagram to help. But there will be two male spade terminals with scratch marks on them to at least give a clue as to where the were pulled off. But which is which once you’ve located those 2 terminals is going to be the problem. All the best…! 😀

    December 1, 2013 at 6:48 pm #405542
    *AL*
    Participant

    Re: Beko DV555 switch change.

    Thanks you for your help Martin, hopefully someone somewhere has a wiring diagram for this model ?

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.