ElectroluxEW1200i wiring to heater and NTC

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ElectroluxEW1200i wiring to heater and NTC

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 6, 2013 at 12:34 pm #78489
    chitts
    Participant

    I’ve been to repair this W/D and found the belt shredded as is common. This one has ripped the wiring off the heater, NTC and earth connections and wrapped about 25cm around the motor shaft.Amazingly it didn’t trip and customer only called because it wouldn’t spin.
    I have 2 grey leads,an orange lead and the connector block from the NTC with 1 orange lead still attached.
    Could someone help with a wiring diagram, or just advise where the wires go.
    Thanks

    December 6, 2013 at 3:10 pm #405848
    Martin
    Participant

    Re: ElectroluxEW1200i wiring to heater and NTC

    The attached wiring diagram may help though to be certain it’s the correct one it would help if you gave us the PNc number of the machine. There are 7 versions of EW1200i’s. 😉

    December 6, 2013 at 5:48 pm #405849
    chitts
    Participant

    Re: ElectroluxEW1200i wiring to heater and NTC

    Sorry.
    PNC. 914674010/01
    Thanks for your time.

    December 6, 2013 at 6:25 pm #405850
    Martin
    Participant

    Re: ElectroluxEW1200i wiring to heater and NTC

    chitts wrote:Sorry.
    PNC. 914674010/01
    Thanks for your time.

    As luck would have it the wiring diagram I posted for you earlier IS the correct one. 😀

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.