- This topic has 3 replies, 3 voices, and was last updated 12 years, 3 months ago by
.
-
Posts
-
Hi guys went to a Bosch classixx dishwasher tonight. Sorry did not grab the model as I thought if fixed it, its the one with the removable metal base panel. Same as SGS53c ect.
It would not drain at all , removed all the pipe work and found a pice of glass blocking, remove and now it would pump water drained but it’s not rite . Its on a drain hose extension to reach the sink (1 mtr extension) and it does drain but not fully.
They are getting water left I the bottom. When I reset the program it starts to drain, stops then starts again. It does this a few times then just stops with the water left.
Pipe work is clear, any advice ?
Re: Bosch Dishwasher help
Make sure the push in plastic part that covers the pump impellor under the filter housing is in place or not missing. It won’t drain properly without it. Caught me out a few times!
Re: Bosch Dishwasher help
Yep that’s in, its bloody odd. Had it in pieces and found one piece of glass lodged in the pipe between the pump and metering tank, had the drain hose off and that’s clear.
I just was not happy with it when I left and said to the customer run a cycle and let me know what it does, got the call tonight re it not being rite.
Going to go back tomorrow.
- You must be logged in to reply to this topic.