- This topic has 2 replies, 2 voices, and was last updated 12 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Guys,
Went to a Whirlpool ADG7560/1 dishwasher with a leak on the seem of it’s heating element. I’ve replaced this but immediately noticed that when the machine is turned on the element heats, basically I’m getting 240V to it unless the machine is turned off. I’ve run the machine through a test cycle and it didn’t come back with a fault!
Would I be right in thinking it’s the control board?
Mark
Re: 240V constantly to heating element
id suspect that the contacts in the heater relay have welded together. should get away with soldering in another.
happens often on beko dishwashers
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.