H/point FDL570 D/W Is This Sequence Indicating A Fault Code?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › H/point FDL570 D/W Is This Sequence Indicating A Fault Code?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 16, 2013 at 8:05 pm #78641
    laurenceuk
    Participant

    Hi,

    This machine will have the following lights flashing after about one hour into the program:

    salt-rinse aid-pause.

    Does this indicate a particular fault code?

    Thanks

    Laurence

    December 16, 2013 at 8:11 pm #406394
    iadom
    Moderator

    Re: H/point FDL570 D/W Is This Sequence Indicating A Fault C

    Error codes are in the Known Error Codes thread.;)


    Sent from my iPad using Tapatalk HD

    December 16, 2013 at 8:33 pm #406395
    laurenceuk
    Participant

    Re: H/point FDL570 D/W Is This Sequence Indicating A Fault C

    Thanks Iadom, found them.

    Could you clarify please. Where you have stated the following:

    “Hotpoint FDL570. FDM550 D/W.
    Ignore flashing On/Off. Salt & Rinse aid will also flash in error mode.
    Wash = 1
    Drying = 2
    End = 3
    Start/Pause = 4″

    Am I correct to assume that though the rinse aid and salt lights flash, I am to ignore them as not relating to being part of any error code?

    Thanks.

    Laurence

    December 16, 2013 at 8:39 pm #406396
    iadom
    Moderator

    Re: H/point FDL570 D/W Is This Sequence Indicating A Fault C

    Correct, they flash for ALL error codes.

    December 16, 2013 at 8:40 pm #406397
    Martin
    Participant

    Re: H/point FDL570 D/W Is This Sequence Indicating A Fault C

    Yes!

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.