Beko WME8227W not spinning

Home Forums Public Support Forums Help And Support Washing Machine Help Forum Beko WME8227W not spinning

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #78671
    billysdiet
    Participant

    Hi. My machine was mid way through a programme (display said 56 mins left) I checked it again a while later and it said end. Seemed to quick so I opened the machine and it had water on bottom, no spin seemed to have happened. I tried drain and spin. It took the excess water away but would not spin. Checked filter (coin came out) still will not drain. Checked belt is in place, all fine. It will fill with water and run a programme it is just still when it should be spinning. Any ideas? I was washing 1 pair of trousers, dry weight of 450gs. I was also doing a dye of the trousers with Dylon. But I can’t see how this would have effected it? But then again it was working fine the other day and now its not. I tried a full wash after in cases it was an imbalance thing but I now just have more very wet clothes. Any advice? Thanks for reading.

    #406479
    billysdiet
    Participant

    Re: Beko WME8227W not spinning

    Done a reset and got code E11.

    #406480
    kwatt
    Keymaster

    Re: Beko WME8227W not spinning

    Motor error detected.

    Could be carbons which is the best hope, the wiring, the motor or the control module and I’d suggest checking in that order.

    K.

    #406481
    billysdiet
    Participant

    Re: Beko WME8227W not spinning

    Thanks K.

    4 questions – could it have been caused by the dylon?

    Is using the dylon likely to invalidate my extended warranty?

    And I thought it might be the brushes? Was going to check them today and buy from ebay for £5.

    I have looked on this site and found no mention on how to check/replace the carbons. Is it an engineer job or can a novice do it?

    Thanks a lot.

    Billy.

    #406482
    billysdiet
    Participant

    Re: Beko WME8227W not spinning

    Oops, quick google search and carbons are listed as carbon brushes. Should have checked first!

    #406483
    kwatt
    Keymaster

    Re: Beko WME8227W not spinning

    It should be these carbon brushes…

    http://shop.ukwhitegoods.co.uk/car75-be … on-brushes

    Do check before you order them though.

    K.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.