Dryer Element not Heating Question

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Dryer Element not Heating Question

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 22, 2013 at 12:38 pm #78722
    kauile
    Participant

    Model JLBIWD1400

    I need a fresh mind to help me out with my JLBIWD1400 (I understand also branded as AEG Electrolux and Zanussi).

    Problem: The Dryer Heater element does not heat.
    Background: I recently changed the triple inlet valve as the condenser supply solenoid had died giving me an E10 error.
    Description: Everything looks good: no error codes, good water pressure & cold flow to condenser unit, blower fan running, continuity through both elements (110 Ohms), mains across all elements and of course NTC reads good ~5kR, safety thermostat and manual reset all good (no O/C).

    What am I missing?

    December 22, 2013 at 8:22 pm #406691
    Martin
    Participant

    Re: Dryer Element not Heating Question

    Check the other NTC attached to the bottom hose of the condenser unit.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.