- This topic has 1 reply, 2 voices, and was last updated 21 years, 2 months ago by
.
-
Posts
-
Hi and thanks in anticipation for any help you can give me! I have a Zanussi DW908 dishwasher about seven years old. It is not filling with cold water, but if the dishwasher is manually filled, it will strat a wash cycle, although it then stops again after that cycle and the dial has to be moved on manually.
It seems to be draining okay and the flywheels seem to be turning okay as well. Most importantly there is also no heat in the machine, so it seems faulty in two distinct areas, although they may of course, be linked!
Any suggestions greatfully received
Re: Zanussi DW908 – not filling and no heat
The two faults are related and both point to the IWMS (inlet water management system) by the sound of it.
Not a DIY job this one, I would recommend you ask an engineer to check over and possibly replace the above.
Have a look at the repairs@ module and in the directories, there should be someone in your area who can help.
Dave.
- You must be logged in to reply to this topic.