Built In Candy CDS220X-80 dishwasher CIRCULATION PUMP

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Built In Candy CDS220X-80 dishwasher CIRCULATION PUMP

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 5, 2014 at 7:03 pm #78861
    DAR01
    Participant

    The above machine fills with some water and the Circulation pump starts to circulate the water,the machine continues to fill but the Circulation Pump rather than running constant, pulses.
    The pump is ok as i have replaced it and the problem still remains,control module no obvious signs of damage,pipes to pressure switches are clear ,can’t hear the pressure switches clicking.
    Anyone Help please?
    🙁 🙁 🙁
    Mike

    January 8, 2014 at 7:30 pm #407149
    Madmac
    Participant

    Re: Built In Candy CDS220X-80 dishwasher CIRCULATION PUMP

    Really sounds like a blockage to me Mike. Pump starts to run but then creates a low pressure spot so stops for a moment until the pressure equalizes.
    Had a whirlpool integrated recently with exactly the same problem, although I could hear the sump press sw clicking.

    Eddie.

    January 17, 2014 at 8:56 pm #407150
    DAR01
    Participant

    Re: Built In Candy CDS220X-80 dishwasher CIRCULATION PUMP

    Thanks for the reply, think i will try replacing the pressure switches and see if that solves the problem.
    Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.