siemens wm16s794gb/09 – UK Whitegoods

This topic has 8 replies, 2 voices, and was last updated 12 years, 3 months ago by mikehha.

Viewing 9 posts - 1 through 9 (of 9 total)

Author

Posts
January 8, 2014 at 3:51 pm #78921

mikehha
Participant

Is there anyway to reset the board and ang get rid of a fault code so we can see if it comes back.

January 8, 2014 at 4:32 pm #407359

Martin
Participant

Re: siemens wm16s794gb/09

What fault code is it showing?

January 8, 2014 at 5:15 pm #407360

mikehha
Participant

Re: siemens wm16s794gb/09

f43 motor fault martin. (new motor fitted)

January 8, 2014 at 7:06 pm #407361

Martin
Participant

Re: siemens wm16s794gb/09

I’m not sure on this model but it might be the same reset procedure as most Bosch machines. Namely the press and hold the spin button etc etc……???

January 9, 2014 at 8:24 am #407362

mikehha
Participant

Re: siemens wm16s794gb/09

Thats what I thought but the spin buttons are a plus and a minus have tried holding both and separately but still cant get rid of fault code.

January 9, 2014 at 10:01 am #407363

Martin
Participant

Re: siemens wm16s794gb/09

Have you tried clearing it with the motor plug disconnected?

January 10, 2014 at 9:26 am #407364

mikehha
Participant

Re: siemens wm16s794gb/09

disconnected motor still no joy ? any other ideas! dont want to scrap it its to good

January 10, 2014 at 11:55 am #407365

Martin
Participant

Re: siemens wm16s794gb/09

What was the state of the motor to warrant its replacement? Because if it was really bad it could have blown the triac on the PCB as well. A visual inspection of the PCB may just confirm that? 🙁

January 10, 2014 at 12:32 pm #407366

mikehha
Participant

Re: siemens wm16s794gb/09

front bearing outer shell cracked! never seen that befor.
Author

Posts

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.