Hotpoint Aquarius WD640 fault code F-11

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint Aquarius WD640 fault code F-11

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 11, 2005 at 8:45 pm #7893
    rosensfole
    Participant

    This is a recently bought machine (brand new) which displayed code F-11 after a ‘super wash’.

    I switched the machine off then on and did a rinse/spin cycle with no problems. I’m still a bit worried though…

    Anyone know what the code means? Should I really worry?

    Additional info: the machine fills/drains perfectly OK

    February 11, 2005 at 8:50 pm #125796
    clyde
    Participant

    Re: Hotpoint Aquarius WD640 fault code F-11

    F -11 is a drain out problem,

    Check your plumbing for blockages, or outlet hose for kinks or siphoning

    Clyde 8)

    February 11, 2005 at 8:56 pm #125797
    rosensfole
    Participant

    Re: Hotpoint Aquarius WD640 fault code F-11

    Thanks Clyde!

    It’s newly plumbed in… by me 😕 The connection point for the outlet isn’t in a good place (previous house owner’s poor plumbing) so I guess I’ll need to sort that out.

    Thanks for your help 😀

    J.

    P.S. Is there a list of all the codes anywhere? Just in case…

    February 11, 2005 at 9:02 pm #125798
    clyde
    Participant

    Re: Hotpoint Aquarius WD640 fault code F-11

    rosensfole wrote:

    P.S. Is there a list of all the codes anywhere? Just in case…

    The code lists are a guide for enginners and only available to engineers in the trade. Any more problems keep this site bookmarked

    Clyde 8)

    February 11, 2005 at 9:34 pm #125799
    dpm
    Participant

    Mmm, the codes for many pieces of equipment are only available to engineers, yet they seem to migrate into the public domain…

    February 11, 2005 at 9:43 pm #125800
    Dave_Conway
    Participant

    Re: Hotpoint Aquarius WD640 fault code F-11

    What Clyde means is they are an engineers guide only and not a definitive diagnostic tool.

    We can only give you a point in the right direction.

    F-11 as was pointed out is a “no drain” situation which in turn can lead to many different scenarios causing the same fault to appear and is pretty much the simplest one of all to rectify 😀

    I hope that clarifies this a little 😉

    Dave.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.