- This topic has 1 reply, 2 voices, and was last updated 12 years, 3 months ago by
.
-
Posts
-
Hi all
My Beko DW tripped the electrics this morning. The cycle was at the water heating part, in order to drain the water I put the programmer onto the start of a new cycle and switched back on, the drain pump ran for maybe 5 seconds then it tripped the trip again. I had to go thru this process 6 times to get the water out each time it tripped. I cant find a wiring diagram so am unsure of how the circuit runs. At first I assumed the heating element was at fault but am not sure now as it tripped when the pump was running. Do these machines have diagnostic cycles? I worked as a DA Engineer for Comet so have an understanding, thanksRe: Beko DE2542 FS
No circuit diaagrams/wiring diagrams can be provided to the general public i’m afraid, see Forum Rules.
Its likely there is a short circuit somewhere. If you worked as an engineer it should be no problem for you to get out a multimeter and do some testing and find the actual fault that is causing this tripping. Power off of course when testing.
- You must be logged in to reply to this topic.