indesit dishwasher DI620

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › indesit dishwasher DI620

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 18, 2014 at 3:27 pm #79074
    valmo
    Participant

    my indesit dishwasher di620 will not fill up or wash. the selected programme jumps back to 1 and flashes . we have checked the water outlet and its not blocked . this dishwasher is 9 years old and has never broken down any advice please thanks val.

    January 18, 2014 at 3:32 pm #407802
    Martin
    Participant

    Re: indesit dishwasher DI620

    Won’t fill? Have you checked the water fill supply to it?

    January 18, 2014 at 3:43 pm #407803
    iadom
    Moderator

    Re: indesit dishwasher DI620

    1st light flashing is a flooded base. Unplug, drag it out and place some towels on the floor, tilt it to one side, don’t lie it down and you should see water running out from underneath. Then try it again, if it fails in short order then you have an internal leak that needs to be rectified.

    January 18, 2014 at 4:05 pm #407804
    valmo
    Participant

    Re: indesit dishwasher DI620

    thanks …..the dishwasher is integrated ? does it still need to be pulled out its packed in tight between the cooker and sink .

    January 18, 2014 at 4:27 pm #407805
    iadom
    Moderator

    Re: indesit dishwasher DI620

    It will have to come out.

    How else would any person repair anything in the body of the machine?

    You need to keep your fingers crossed and hope that the kitchen fitter or plumber had at least a small amount of common sense. Sadly our experience in the trade often suggests the opposite. :rolls:

    January 18, 2014 at 5:38 pm #407806
    madangler1
    Participant

    Re: indesit dishwasher DI620

    Check the nut below the lower wash arm, very common to come loose and flood the base.

    Remove the wash arm and this should leave a plastic tube about 2 inches tall sticking up from the base, this is the feed tube and nut that holds the motor to the base of the tank, it should be tight, if its at all loose it will leak.

    You will still need to pull it out to drain it out, well I say that I have on occasion that I know It was the nut just lowered the base panel from the front by removing the screws and drained the water that way


    Not recommended though if you not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} that that’s the leak.

    Really dishwashers are not easy to work on unless you have experience.

    Working on A tank of water sitting above multiple electrical items requires a certain amount of knowledge and experience to prevent anything bad happening tbh.

    If unsure get some one in.

    January 30, 2014 at 11:04 pm #407807
    valmo
    Participant

    Re: indesit dishwasher DI620

    thanks for the information …… yes the bottom wash arm was loose and lifted straight out so there probs is water in the base . we’ve not had a chance to pull it out yet….. ta

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.