AEG Pnc 944181735 (single oven)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG Pnc 944181735 (single oven)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 31, 2014 at 4:11 pm #79300
    rocker
    Participant

    looking to overide the clock on this oven, there are 4 wires going into the clock.
    I have tested for voltage both pairs have neg & postive feeds. as these are the only wires, not sure which is switching from the relay. !!
    can anyone advise me on this or perhaps a wiring diagram will help.
    Thanks John

    February 1, 2014 at 11:53 pm #408743
    electrofix
    Moderator

    Re: AEG Pnc 944181735 (single oven)

    have not looked up this cooker but most simple clocks go as follows


    the clock will be fed with a live and neutral so you can buzz these wires from the mains conn block
    you might find you have 2 lives and a neutral and 1 wire left over which wont buzz
    the wire that wont buzz will be the switch wire. most likely feed it live and all will work
    if you are worried either put a 5a fuse in the plug to try or use your multimeter on ohms and try all positions

    hope it helps

    Dave

    normally the wires nearest the relay are the ones

    February 2, 2014 at 12:35 pm #408744
    rocker
    Participant

    Re: AEG Pnc 944181735 (single oven)

    thanks for reply, but as I said all wires are carrying voltage both pos & neg, there isnt a dead one, as to byepass.

    February 2, 2014 at 1:32 pm #408745
    Martin
    Participant

    Re: AEG Pnc 944181735 (single oven)

    rocker wrote:thanks for reply, but as I said all wires are carrying voltage both pos & neg, there isnt a dead one, as to byepass.

    Email me and I can send you the wiring diagram of the clock. 😉

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.