Bosch SGS43A32 not filling

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Bosch SGS43A32 not filling

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • February 1, 2014 at 6:54 pm #79317
    lmcc67
    Participant

    Hi I have a Bosch SGS43A32 dishwasher that is not letting water in and just making a churning noise. I have disconnected the water hose and reconnected but to no avail it still does not fill. can anyone help please

    February 1, 2014 at 7:15 pm #408795
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    I have read on other posts that the problem may be the /safety valve needs replacing. Where would I find this please

    February 1, 2014 at 7:15 pm #408796
    Martin
    Participant

    Re: Bosch SGS43A32 not filling

    The base tray may well be flooded. Does the machine keep “churning” even if you open the door?

    February 1, 2014 at 7:28 pm #408797
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    yes it does Martin and I pulled it out and water did come out of it. Is there a way of fixing it or has it had it days?

    February 1, 2014 at 7:53 pm #408798
    Martin
    Participant

    Re: Bosch SGS43A32 not filling

    There is an internal leak causing the base to flood and the anti-flood switch to activate. Power off, remove the base plate and check for leaks. Look closely at the main circulating pump for water stains coming from drive shaft. 😉

    February 1, 2014 at 8:17 pm #408799
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    I have tipped it forward and water has poured out. I have managed to get the sides off but do not seam to be able to take the bottom off, any ideas?? also any ideas where the main circulating pump and drive shaft are
    thank you Martin

    February 1, 2014 at 8:18 pm #408800
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    also any ideas where the anti-flood switch is please

    February 1, 2014 at 8:42 pm #408801
    Martin
    Participant

    Re: Bosch SGS43A32 not filling

    Tip the machine on its back. Remove the metal base and all is right there.

    February 1, 2014 at 9:22 pm #408802
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    I tipped it on its back but was not able to take the bottom off. The water is filing up on the side container and letting the water in but after the machine drains once it just drains and drains and stops when i open the door fully. It is leaking but then if it is leaking is there anything you can do to stop it leaking?

    February 1, 2014 at 9:34 pm #408803
    Martin
    Participant

    Re: Bosch SGS43A32 not filling

    You have to take the metal base off. What is the problem in doing that?

    February 1, 2014 at 9:35 pm #408804
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    I can not see any screws to take the base off

    February 1, 2014 at 9:46 pm #408805
    Martin
    Participant

    Re: Bosch SGS43A32 not filling

    Just release the tabs at the front. Very simple not exactly a challenging stage. That comes when you get it off…. Blimey! 😉

    February 1, 2014 at 11:02 pm #408806
    lmcc67
    Participant

    Re: Bosch SGS43A32 not filling

    hiya I took the bottom off and it seems like the I think its the circulation pump its part 5600039406 has some water coming from it. I t seems like it is not connected properly into the bottom part that drains the water away, it has some play in it where it connects. Not sure if it is suppose to have a bit of play or pushed right in!!!!!! not sure really what i am looking for!!!!!

    February 2, 2014 at 9:07 am #408807
    Martin
    Participant

    Re: Bosch SGS43A32 not filling

    You might then need to seek expert help. Go to our local engineer search page click here for one in your area. 😀

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.