Hoover OPH714D module.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Hoover OPH714D module.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 4, 2014 at 8:22 pm #79370
    aqualectric
    Participant

    Hoover OPH714D washer. 31002503 0816 0660.

    Need the module / core board for the above machine. The live from the selector switch tag (on the rast plug) has blown the solder track for no apparent reason. Motor and heater both megger out OK and whole machine checks out fine as well. Must be just the PCB then…
    The module shown on Connections does not state if it is configured or not…anyone have any info on this please?

    Thanks,

    Steve.

    February 5, 2014 at 7:37 am #408962
    timdowning
    Participant

    Re: Hoover OPH714D module.

    49013868 is listed for that serial number on qualtex.
    Typing that number into connect says ‘prog module’.

    February 11, 2014 at 10:48 pm #408963
    aqualectric
    Participant

    Re: Hoover OPH714D module.

    Thanks for that Tim – but the customer decided that the price I quoted for the module was “way over the top” as he had rung Hoover direct and could get that module for £26 from them but could I fit it when it arrived?
    So when it arrived at £26 he phoned me and it was (as I’d expected) the control panel PCB. “Sorry, I don’t fit customer’s own modules as I cannot guarantee them to be coded, new, e’bay, or the even correct item…as you have now discovered…sir. The bill for £30 diagnostic fee is on it’s way….. Good day to you!!” 😀

    Complete ‘merchant banker’….. :rolls:

    Cheers,

    Steve.

    February 12, 2014 at 7:51 am #408964
    Andy jones
    Participant

    Re: Hoover OPH714D module.

    Serves him right.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.