Whirlpool ADG 7550 fault diagnosis

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADG 7550 fault diagnosis

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 16, 2014 at 11:06 pm #79560
    tim1980
    Participant

    Hi

    My Whirlpool ADG 7550 dishwasher blew it’s 13a fuse, and tripped out the electrics a couple of weeks ago

    I replaced the fuse, and all seemed well for a while (albeit with a little bit of thudding noise partway through the programme), but it’s now blown a second fuse and third fuse tonight, and I can smell an overheated component type smell.

    I’m thinking it’s got to be a pump or pump motor overheating. If it was the element, it wouldn’t have heated the water up at all.

    Any tips on diagnosing the faulty component, and if you are aware of any common issues with this make and/or model?

    Thanks in advance for your help

    Tim

    February 17, 2014 at 12:20 am #409703
    kwatt
    Keymaster

    Re: Whirlpool ADG 7550 fault diagnosis

    There are several “common” components in that range that can pop. But, no stand out from what you describe.

    Don’t rule in or out anything though as, if the insulation breaks down then the heating element can still be an issue.

    The only way to know is to test it and investigate a bit more.

    K.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.