- This topic has 4 replies, 2 voices, and was last updated 12 years, 1 month ago by
.
-
Posts
-
Whent to this dryer today it will run for ten min then stops with the clean filter light on and the iron dry light on filter and condensor are clean float and pump working ok sounds like a faulty censor any one had same problem
Re: dsc85w beko dryer
Check the float switch connector plug, have found a few of them low giving false readings back to electronics that the float switch has activated. Failing that check the heater N.T.C, also prone to going low due to excess moisture from condenser not being cleaned.
Re: dsc85w beko dryer
Thanks for the information i did check the foat switch but i will test it again
Re: dsc85w beko dryer
Not the float switch, the conector that plugs into the float switch sometimes goes low enough to fool the electronics into thinking that the switch as been made.
- You must be logged in to reply to this topic.