Bendix biw105w end light 3 flashes,

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bendix biw105w end light 3 flashes,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 20, 2014 at 8:29 am #79628
    hilly
    Participant

    Hi, bendix biw105w when the machine starts on any cycle it drains then all lights go off and the end light repeatedly flashes 3 times, I’ve seen a few problems with the pcb on these models but not this fault, everything else checked out ok
    Thanks Paul

    February 20, 2014 at 8:48 am #410030
    Martin
    Participant

    Re: Bendix biw105w end light 3 flashes,

    As you probably are aware by now the END led represents the first error of the code ( i.e 3) the START/PAUSE led represents the second. If you only have the one led flashing at least you know where to look as per the KNOWN ERROR CODES listing.

    It’s a pressure switch or PCB or heater insulation fault by the way. 😀

    February 20, 2014 at 10:23 am #410031
    hilly
    Participant

    Re: Bendix biw105w end light 3 flashes,

    Many thanks Martin

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.