Fault codes ( flashing lights )

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Fault codes ( flashing lights )

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 24, 2014 at 1:01 pm #79682
    Claudino
    Participant

    #1 Claudino Garcia 2014-02-22 15:06
    Amica AWCM10L
    Washer drum only rotates clockwise. Water goes in drum turns 3 times then flashing lights at ( standby, end, 60, 0 ( temperatures )
    This happened before and I worked at it don’t know what I done but it worked for a while. Have checked motor, brushes etc. am thinking it might be the circuit board but I would like to be sure before I order one as they are quite expensive. ( £70 )
    All help would be greatly appreciated.
    Thanks
    Quote

    February 24, 2014 at 1:29 pm #410213
    kwatt
    Keymaster

    Re: Fault codes ( flashing lights )

    If it’s standby, end, 95 and the 60 and cold then it’s detecting no water for some reason.

    If it’s the 30 light and not the cold then it’s a failure to drain.

    K.

    February 24, 2014 at 4:49 pm #410214
    Claudino
    Participant

    Re: Fault codes ( flashing lights )

    Hi kwatt
    Thanks for getting back to me. Flashing lights are definitely …… Standby,end and 60 temp and cold.
    When water goes in the drum turns 3 times clockwise doesn’t turn anti-clockwise at all. ?
    Got any more thoughts ?
    Thanks
    Claudino

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.