Hoover error code e07

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover error code e07

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 27, 2014 at 2:20 pm #79742
    littlelegs
    Participant

    Hi
    I have a hoover wdyn856dg washer dryer. At the end of the dry cycle it is displaying e07. I am a refrigeration/air con engineer myself so im sure i can repair it but hoover wont tell me what the code signifies. Any help and guidance would be greatly appreciated
    Thanks
    Alan

    February 27, 2014 at 3:25 pm #410402
    Martin
    Participant

    Re: Hoover error code e07

    Dependant on what electronic board is fitted MDL or Invensys it means…..

    (MDL) – Jammed Motor’s Rotor and/or Wiring.

    (INVENSYS) – Defective Door Safety Lock Device (blocked closed) and/or Wiring.

    February 28, 2014 at 10:29 am #410403
    littlelegs
    Participant

    Re: Hoover error code e07

    Thank you for the quick reply martin. I’ll check which board then check all relevant wires to see if anything is loose. Where is the board located? Is it behind the display or elsewhere. Dont wanna remove any panelling or parts i dont have to. I havent started taking it apart yet but is the door catch east enough to access?
    Many thanks again

    February 28, 2014 at 11:43 am #410404
    Martin
    Participant

    Re: Hoover error code e07

    Why are you checking the board, just out of interest?

    February 28, 2014 at 3:11 pm #410405
    littlelegs
    Participant

    Re: Hoover error code e07

    Thought i had to identify the board to identify what the code means?

    February 28, 2014 at 4:12 pm #410406
    Martin
    Participant

    Re: Hoover error code e07

    littlelegs wrote:Thought i had to identify the board to identify what the code means?

    Nope, just check the motor AND the door interlock, that way you’ve covered all options. 😉

    March 7, 2014 at 12:26 pm #410407
    littlelegs
    Participant

    Re: Hoover error code e07

    Thanks for the help martin. Its actually stopped giving the error code now so im guessing likely a problem with the door lock. If it happens again i’ll know where to look.
    Cheers
    Alan

    March 7, 2014 at 3:53 pm #410408
    timdowning
    Participant

    Re: Hoover error code e07

    Only two panels anyway. Lid & back!

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.