hoover ophs612 Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › hoover ophs612 This topic has 10 replies, 3 voices, and was last updated 12 years ago by bigred. Viewing 11 posts - 1 through 11 (of 11 total) Author Posts March 12, 2014 at 5:47 pm #79921 bigredParticipant hi my hoover optima ophs612 does the whole wash but then cuts out mid spin every time & puts the 3 bottom lights on , they don’t flash thankyou March 12, 2014 at 6:45 pm #411047 timdowningParticipant Re: hoover ophs612 What happens when you do a spin only cycle? March 12, 2014 at 6:55 pm #411048 bigredParticipant Re: hoover ophs612 spin only is the same , cuts out before the end & same 3 lights on cheers March 12, 2014 at 7:25 pm #411049 MartinParticipant Re: hoover ophs612 Does the LED (top right nearest the selector switch) flash? March 12, 2014 at 7:58 pm #411050 bigredParticipant Re: hoover ophs612 no lights flash at all mate March 12, 2014 at 8:06 pm #411051 MartinParticipant Re: hoover ophs612 OK mate, check the motor brushes mate. 😉 March 12, 2014 at 8:11 pm #411052 bigredParticipant Re: hoover ophs612 Martin wrote:OK mate, check the motor brushes mate. 😉 thanks will do that in morning & let you know cheers this machine is only 2 years old & had very little use , maybe motor fault if not brushes then? March 12, 2014 at 8:52 pm #411053 MartinParticipant hoover ophs612 Not necessarily, but needs checking for sure, as does the heater too. March 12, 2014 at 8:57 pm #411054 bigredParticipant Re: hoover ophs612 Martin wrote:Not necessarily, but needs checking for sure, as does the heater too. heater tests out fine & works fine March 13, 2014 at 10:10 am #411055 bigredParticipant Re: hoover ophs612 brushes are like new , cleaned & checked all connections same fault still there does the fast spin then cuts out & the wash,rinse,spin lights come on with NO flashing thanks again for your help March 13, 2014 at 1:46 pm #411056 timdowningParticipant Re: hoover ophs612 If it does the fast spin then stops with those lights on then that means the cycle has ended as it should. What are you expecting it to do after the fast spin but before the end? Author Posts Viewing 11 posts - 1 through 11 (of 11 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In