- This topic has 4 replies, 2 voices, and was last updated 12 years ago by
.
-
Posts
-
PNc914603301/00 door lock shorted and blew tracks on pcb.Replaced door lock and obtained a new board(configured) but only on/off light works.If I press some of the other buttons lights come up but disappear when released.Checked out all the usual suspects motor etc.Not replaced pcbs on these before as the job is too expensive for most customers.Is there something else I have to do or missed?
Re: ZanussiZWD1472W
But are you certain the PCB was for that EXACT model and that it was configured correctly?
Re: ZanussiZWD1472W
reaper wrote:Ordered it direct from Electrolux using the pnc no. as reference.
There are 2 different boards on these, one configured, the other needs laptop configuration. Are you certain they supplied the configured version? As far as I can tell the part number of it should be 973914603301008.
Re: ZanussiZWD1472W
yep invoice says 973914603301-00/8 PCB.Configured.EWM2000EVO. I’m going back tomorrow to double check the wiring and with a spare motor also a working fascia board.I didnt have a lot of time on Saturday morning as the customer was having a kids party and I was ‘in the way’.This job would be easy if it wasnt for people.
- You must be logged in to reply to this topic.