cda wc140 integrated dishwasher wiring

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › cda wc140 integrated dishwasher wiring

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 25, 2014 at 4:10 pm #80103
    servbland
    Participant

    ❓ Can anyone out there help us with this dilemma ? We have been out to this machine which was flashing fault light and beeping . We have found the problem which is the wiring in the door , namely two very thin black wires which both come off the pcb . One goes to the thermistor and the other one appears to go to the salt light sensor . Both wires are broken completely and as 1)they are such small wires , and 2) eyesight is diminishing rapidly with age , we cannot tell which ends to join together . We do not want to chance guessing as given the choice of two we would normally need two goes to guess right and do not wish to blow the pcb . Has anyone got a wiring diagram please or any info that may assist us . Your help will be greatly appreciated ! :con:

    March 25, 2014 at 4:16 pm #411678
    ncas
    Participant

    Re: cda wc140 integrated dishwasher wiring

    Suggest you do a loom this is a known fault

    March 26, 2014 at 6:10 pm #411679
    keithwilliams
    Participant

    Re: cda wc140 integrated dishwasher wiring

    i must have been lucky then. i had same wires broken and assumed they were both from thermistor and just randomely soldered them and it worked. if they are for different components then thanks for heads-up i’ll check better next time.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.