PRIMA LPR600 Error code F!!?

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › PRIMA LPR600 Error code F!!?

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • March 30, 2014 at 8:43 pm #80150
    Bigstu07
    Participant

    Good evening folks, today of all days (Mothers Day) the dishwasher decided to stop working properly and I am now getting the above error code. I’m led to think (by looking around a bit that this is something to do with the optical water sensor or the pressure switch)?
    If not, then what could the problem be and how easy is it to resolve?
    Any help will be greatly appreciated.

    Stu

    P.s I had to leave the wife/mother of the kids to do manual washing up as I had to come to work on nightshift so feel pretty bad.

    March 30, 2014 at 8:48 pm #411887
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    A bit more info, it beeps continuously when the error occurs and flashes 11 times, I reset this by holding the start button down and restart the wash cycle, the sump pump kicks in, gurgles, i hear water start to drain away (i put water in manually to see if the pump was actually pumping) then after a few minutes the beeping starts and the cycle goes to rinse mode and flashes 11 times.
    Cheers.

    Stu

    March 30, 2014 at 8:56 pm #411888
    Martin
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Flow meter/Turbidity error apparently.

    March 30, 2014 at 8:57 pm #411889
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Error code FA, 11 flashes.

    March 30, 2014 at 8:58 pm #411890
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Martin, do you know how to go about replacing this part? And if so, what is the exact part number I require please?
    Cheers,

    Stu

    March 30, 2014 at 9:10 pm #411891
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    http://www.ukwhitegoods.co.uk/help/faul … codes.html

    If i’m reading this error code thing correctly, then I assume that a Optical Water Indicator is not a flow meter but something which checks the condition of the water, e.g dirtiness/conductivity. Would that be a correct assumption?

    Cheers,

    Stu

    March 30, 2014 at 9:18 pm #411892
    Martin
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Yes correct. It is also referred to as a Turbidity Sensor.

    March 30, 2014 at 10:25 pm #411893
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Cheers,

    So what is the part that I need to sort my dishwasher out then please? Or should I try some things before buying the part?

    Many thanks,

    Stu

    April 1, 2014 at 4:19 pm #411894
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Ordered a new pressure switch, seems easy enough to replace after finding a tutorial on YouTube so once I’ve replaced it, I’ll let you know if it’s a success or not.

    Cheers,

    Stu

    April 6, 2014 at 11:39 am #411895
    Bigstu07
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Right folks! I’ve replaced the sensor and it’s still beeping and flashing 11 times, what next?

    March 31, 2018 at 6:59 am #411896
    Rickster54321
    Participant

    Re: PRIMA LPR600 Error code F!!?

    Hello Stu, it been a few years but what was the outcome

    March 31, 2018 at 9:53 am #411897
    electrofix
    Moderator

    Re: PRIMA LPR600 Error code F!!?

    well reading the text above it seem he replaced the pressure switch which is not the turbidity sensor so its not going to cure the fault

    the fault either lies with this sensor or the control board I would think but Martin may confirm that

    As you can see we got no more feedback from Bigstu07

    Dave

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.