Zanussi W/D Dryer time shortened

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi W/D Dryer time shortened

  • This topic has 6 replies, 2 voices, and was last updated 12 years ago by pmb.
Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 1, 2014 at 8:27 pm #80173
    pmb
    Participant

    Zanussi ZWD16270w1 Washer Dryer
    Three weeks ago found wire adrift from dryer temperature probe on lower hose was OK for a couple weeks
    But now dryer time too quick and it also goes to zero before its finished when I put on test fault code E73 Comes up,(dryer NTC) put new Thermister probe in but still the same.
    Anyone got any ideas

    April 1, 2014 at 9:04 pm #411978
    Martin
    Participant

    Re: Zanussi W/D Dryer time shortened

    Which NTC did you replace?

    April 2, 2014 at 6:41 am #411979
    pmb
    Participant

    Re: Zanussi W/D Dryer time shortened

    The one in the lower hose from condenser to tub

    April 2, 2014 at 7:14 am #411980
    Martin
    Participant

    Re: Zanussi W/D Dryer time shortened

    E73 refers to the dryer NTC in the heater duct, hence why I asked the question:wink:

    April 2, 2014 at 8:00 am #411981
    pmb
    Participant

    Re: Zanussi W/D Dryer time shortened

    I assumed NTC would be torpedo type, Three on heater duct all look like thermostate s
    So is it the one in the front

    April 2, 2014 at 10:31 am #411982
    Martin
    Participant

    Re: Zanussi W/D Dryer time shortened

    pmb wrote:So is it the one in the front

    Yes!

    April 3, 2014 at 4:07 pm #411983
    pmb
    Participant

    Re: Zanussi W/D Dryer time shortened

    Thanks Martin its all ok now,

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.