- This topic has 4 replies, 4 voices, and was last updated 21 years, 1 month ago by
.
-
Posts
-
Can anybody tell me what this code means (F7). Sometimes the dishwasher is ok, other times it comes up F7 afer the initial drain before the wash cycle. I have also found that if I put some water in the machine before it starts, again sometimes this seems to be a quick fix.
Re: Whirlpool ADP5966 Fault Code F7
Sounds like it has a problem filling up, check that the tap is turned on fully and the fill hose isn’t kinked
Clyde 8)
Re: Whirlpool ADP5966 Fault Code F7
Thats interesting, while I purchased it secondhand 5 months ago the salt compartment is still half full. We use the machine maybe 5 times a week. I will check your suggestion. Thanks, Paul
Re: Whirlpool ADP5966 Fault Code F7
Hiya, F7 indicates a flow meter failure. Basically, the meter “counts” the water coming in, it is compared with the amount registered with the pressure switch, if both agree it continues normally, if there is a “disagreement” it aborts and brings up an alarm.
It is possibly a faulty pressure switch, faulty flow meter, bad connection or if you’re really unlucky, it’s bringing up a false alarm code, i.e. you have a fault but not the one being indicated.
Before you remove any panels to check, please pull the plug.DP
- You must be logged in to reply to this topic.