- This topic has 2 replies, 2 voices, and was last updated 11 years, 11 months ago by
.
-
Posts
-
I have a Bosch Logixx 7 Integrated Washer Dryer. Seems to have got stuck and the following lights have started flashing (Spin =400 + Spin + End). Used the water release at the bottom to drain the drum. Opened the door with the emergency release. No more water seen in the drum. Switched off the machine a few times. But the machine refuses to work, lights are still flashing. Tried finding help online but no luck. The manual is also useless. It is an integrated machine, so wont be able to reach the back to check.
E-NR: WIS24140GB/18
Perfect end to the Bank holiday weekend, Anyone with any expertise on how to reset or restart the machine?
Thanks in advanceRe: Bosch Logixx 7 Flashing lights
some faults on bosch machines lock the unit so no more damage can occur
don’t know what the light mean as getting bosch fault codes is difficult but most common fault on machine is the carbon brushes in the motor. on the integrated units it is possible to change these through the cover at the bottom
as for the lock out try this ( not sure it will work on this unit ) but don’t rush it wait about a second between each step
plug machine in
turn timer knob to 6 o’clock position
press and hold spin speed button
turn timer knob 1 click clockwise
release spin speed button
now turn programmer knob to off wait 5 secs and turn onhopefully it will work but you may have to repeat a few times and some engineers say it only works with motor unplugged but I have not found that.
if anyone else knows if this is not correct reset for this unit please post
Re: Bosch Logixx 7 Flashing lights
Hey Electrofix.. tnx for posting.
Dont worry the issue was fixed with help from Martin. It was a flooded baseplate. The other thread is herewashing-machine-forum/bosch-logixx-wis24140gb-flashing-lights-400-spin-end-t79724.html
- You must be logged in to reply to this topic.