Beko WMA 520S washing machine, bought November 2006.

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko WMA 520S washing machine, bought November 2006.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 12, 2014 at 8:33 pm #80648
    robin111
    Participant

    Advice sought on how to change the door seal. The top comes off easily, also the top control panel on the front but the bottom panel on the front is a mystery and there is no sign of a retaining wire holding the seal to the main front panel. Advice would be greatly appreciated.

    May 13, 2014 at 8:24 am #413600
    Seamy
    Participant

    Re: Beko WMA 520S washing machine, bought November 2006.

    No need too take off top or front, all is done through door opening.
    Should be a retaining wire on front of machine & spring on inner. Lube up fingers with fairies liquid when fitting new seal & spring & Bobs your uncle, done many of them, 5 minute job.

    May 13, 2014 at 4:12 pm #413601
    Martin
    Participant

    Re: Beko WMA 520S washing machine, bought November 2006.

    Seamy wrote:Lube up fingers with fairies liquid when fitting new seal & spring & Bobs your uncle.

    I couldn’t have put it any better. :clown:

    May 19, 2014 at 6:00 pm #413602
    robin111
    Participant

    Re: Beko WMA 520S washing machine, bought November 2006.

    Seamy and Martin, Thanks chaps you’ve saved the day and my reputation with my daughter.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.