I have a Bosch slimline classix dishwasher (srs55C02GB/09), The ‘check water’ light keeps coming on. I have replaced the jug impeller and light still comes on, it had a new drain pump last month, so have no idea what it could be, any advice would be gratefully accepted.
That wasn’t the answer I was after. I repeat, go through the reset procedure and report as to what happens. In other words will it drain for 60secs then turn off?
Ahh I misunderstood, when I reset it it does 2 things randomly 1. it will run for 3 mins then red light comes on, 2. it will run normally starting time at 131 mins remaining but then stop at 117 mins left with again the check water red light coming on. In both cases it remains on the time it stopped on but keeps running on the same cycle the red light came on. Thanks for your time on this, very appreciated.
If you cannot clear any programme that has started using the ‘two button reset programme’ procedure then the control unit is faulty. It would pay you to inspect the PCB for track and component damage too! 😀