siemens dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › siemens dishwasher

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 5, 2014 at 3:21 pm #80936
    rickard
    Participant

    I have got a Siemens SN26M290GB/02 Dishwasher which finishes the cycle with error E25 drain fault, The cycle has finished and dryed the dishes but will not complete to drain out just leaves water in the bottom. If you then switch it off and select a new cycle it will drain the water left from the last cycle out, Which is how the customer is using it, Can the pump get weak during use in the cycle or am I looking for something else possibly pcb. Many thanks for any advise
    Andy

    June 5, 2014 at 3:44 pm #414879
    Martin
    Participant

    Re: siemens dishwasher

    The pump is the main suspect as their working life not much more than 3 yrs. Overfoaming of detergent or rinse aid a possible. Or finally, suspect drain outlet? I think that should cover most if not all possibilities.

    June 5, 2014 at 4:08 pm #414880
    rickard
    Participant

    Re: siemens dishwasher

    Thanks Martin I have checked the outlet all ok and there is no signs of overfoaming, so I will go with the drain pump I just thought it odd that it does pump out at the start of cycle but not at the end
    Andy

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.