Hoover HNF7167-80 module question.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hoover HNF7167-80 module question.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 16, 2014 at 8:25 pm #81098
    aqualectric
    Participant

    Hoover HNF7167-80 washer. 3100135108077377.

    The old PCB had been damaged by drips on the pump wiring, so it was otherwise working except for no drain.

    Changed the pump, made a drip cover for it and ordered module for the above machine part number 09200740. Plugged it on and now the machine is completely dead. There is power to the PCB but nothing else. Put the old board back on to test and all OK (less drain function!)

    It appears that 09200740 is either faulty or non-configured. The part was ordered from Connect, so it looked new……. 😕

    Anyone help on this?

    Cheers,

    Steve.

    June 16, 2014 at 8:54 pm #415328
    timdowning
    Participant

    Re: Hoover HNF7167-80 module question.

    HVR09200740 is listed as the programmed module for that machine.
    The module you got must be faulty or unprogrammed.

    June 17, 2014 at 7:55 am #415329
    aqualectric
    Participant

    Re: Hoover HNF7167-80 module question.

    Thanks Tim – Connect won’t get stock until 26th July!! Qualtex have it in stock fortunately.

    Cheers,

    Steve.

    June 21, 2014 at 10:45 pm #415330
    aqualectric
    Participant

    Re: Hoover HNF7167-80 module question.

    Update – fitted new board from Qualtex and all is well!
    Seems as if the PCB from Connect was duff or not configured after all….

    Thanks for the help!

    Steve.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.