Siemens SN25M830GB/07 Diverter valve fault

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Siemens SN25M830GB/07 Diverter valve fault

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 23, 2014 at 1:49 pm #81182
    steven9586
    Participant

    Hello

    I appear to have a diverter valve fault after a stone somehow made it’s way in there. I have stripped the dishwasher down and stripped the valve but the stone must have made its way out.

    The problem is that the spray arms don’t move as I think the circular part with the holes in it that diverts the water has moved out of sync when it was jammed and the cogs just slipped. I put it all back together but theres no way of knowing what position to put it back.

    I tested the dishwasher and water only comes out of the top spray on the roof of the inside and theres a clicking noise.

    can I remove the disk all together or replace the part. how do i test that its defo the part at fault. priced up a new valve for about £25.

    is there a way of knowing how the disk needs to go in properly, and also what position the cog sits in the motor.

    Not sure if any of this makes sense to anyone.

    Regards

    Steven

    June 23, 2014 at 2:09 pm #415709
    Martin
    Participant

    Re: Siemens SN25M830GB/07 Diverter valve fault

    Start messing with the water point diverter valve and it’s game over. Replace the complete unit.

    June 23, 2014 at 5:51 pm #415710
    steven9586
    Participant

    Re: Siemens SN25M830GB/07 Diverter valve fault

    Hello Martin

    So do you think that’s the fault and is there any way off testing it. Don’t want to buy new parts to find it’s not that.
    To be honest I’m pretty certain it is as the spray arms don’t move and there’s a clicking noise as though the plastic teeth are jumping rather than turning.

    If I buy these part’s

    http://www.siemens-home.co.uk/store/spa … 5M830GB/07

    Item’s 0440 and 0410

    Will they come pre-assembled and the diverter disk in the correct place.

    Regards

    Steven

    June 23, 2014 at 5:53 pm #415711
    steven9586
    Participant

    Re: Siemens SN25M830GB/07 Diverter valve fault

    Oh, link doesn’t take you to them, click on SPARE PARTS LIST & DIAGRAMS, then PAGE 4.

    Thanks

    June 23, 2014 at 6:18 pm #415712
    Martin
    Participant

    Re: Siemens SN25M830GB/07 Diverter valve fault

    Those are the parts required. They are preassembled.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.