Bosch WAE2040GB/03 FD9109 Washing Machine

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Bosch WAE2040GB/03 FD9109 Washing Machine

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #81191
    mike412
    Participant

    Hi Folks,

    Posting on behalf of a colleague who would appreciate urgent assistance with this particular problem.

    Machine has three vertical Leds, middle one (rinse) is flashing.
    Owners manual indicates motor fault. Brushes found to be worn out and replaced and motor circuit checked including end frame fuse but middle led still flashes. Is there a reset procedure for this machine or are we looking at a goosed board here?

    Have had a good search for an answer before posting without success.

    Any assistance much appreciated.

    Regards,

    Mike.

    #415731
    Martin
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    The usual 6 0’clock reset procedure I recon. Search Bosch reset if you don’t know how.

    #415732
    mike412
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    Thanks for prompt response Martin.

    My colleague is a very experienced engineer and is well familiar with the six o clock reset procedure,but says that on this machine there is no spin button to activate, so what do you have to do?.

    Regards,

    Mike

    #415733
    mike412
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    Any Bosch Engineers Out there ????

    Customer anxious about her dirty smalls!!!

    Regards,

    Mike

    #415734
    Martin
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    Mike can you give us the correct model number (full ENr no) so we can check this out for you?

    #415735
    mike412
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    Hi Martin.

    I lent my colleague my spare glasses today and he came back with WAE24060GB/03.

    Sorry. Much appreciate your help.

    Regards,

    Mike

    #415736
    Martin
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    Ahh! Use the start button on this for the 6 0’clock reset procedure.

    #415737
    mike412
    Participant

    Re: Bosch WAE2040GB/03 FD9109 Washing Machine

    Thanks Martin,

    Mate thinks he’s done this but going out again tomorrow to check.

    Thanks for you help.

    Mike.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.