Panasonic N4-16V washing machine

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Panasonic N4-16V washing machine

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 15, 2014 at 2:50 pm #81467
    rocker
    Participant

    The plastic cover fitted inside the drum that covers the bolts has fallen off, I am unable to move the large philips screw that hold it on, have tried WD40 / Heated up. still unable to move it. !! thinking of drilling it out, but of course will have to replace with a self tapper screw.! but if this doesn’t work will be in the poo.
    any advice would be welcome. cheers John

    July 15, 2014 at 3:29 pm #416687
    Andy jones
    Participant

    Re: Panasonic N4-16V washing machine

    Had exactly that on my own machine ( don’t ask why I got one ). I ended up drilling plastic so it fitted over the screw and sealed it in place. That was ages ago and it’s still fine however not so sure I would’ve done that for a customer


    Sent from my iPhone using Tapatalk

    July 15, 2014 at 5:50 pm #416688
    rocker
    Participant

    Re: Panasonic N4-16V washing machine

    Thanks Andy, as you say not sure about doing it for a customer either. john

    July 15, 2014 at 6:41 pm #416689
    Andy jones
    Participant

    Re: Panasonic N4-16V washing machine

    I even tried an impact screwdriver and the dam thing wouldn’t budge


    Sent from my iPhone using Tapatalk

    July 16, 2014 at 9:10 am #416690
    rocker
    Participant

    Re: Panasonic N4-16V washing machine

    I can well believe that. cheers john

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.