Whirlpool WWDC6410

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool WWDC6410

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • July 23, 2014 at 2:33 pm #81573
    don
    Moderator

    Hi all

    Can anyone help please 🙂


    Whirlpool WWDC6410 Power to control PCB but no display, the board has been changed but still no joy, any ideas?


    Don

    July 23, 2014 at 3:58 pm #417069
    johnmac11
    Participant

    Re: Whirlpool WWDC6410

    Hi Don,

    Is the new pcb the programmed one as there is also a blank available.

    John

    July 23, 2014 at 4:37 pm #417070
    Grendal
    Participant

    Re: Whirlpool WWDC6410

    Try changing the door switch as they also cause that fault

    July 24, 2014 at 8:13 am #417071
    don
    Moderator

    Re: Whirlpool WWDC6410

    Thanks for the tips guys 😀


    I’ll pass on messages and let you know later.

    Don

    July 24, 2014 at 1:04 pm #417072
    don
    Moderator

    Re: Whirlpool WWDC6410

    Hi John


    We have fitted 481010438414 is it pre programmed or not?


    If it’s unprogrammed any info on programming please.


    Don

    July 24, 2014 at 1:23 pm #417073
    johnmac11
    Participant

    Re: Whirlpool WWDC6410

    Hi Don,

    The pcb you have is un-programmed and appears to be the wrong one anyway. Have you got the 12nc and I will get you the correct part number?

    John

    July 24, 2014 at 1:35 pm #417074
    don
    Moderator

    Re: Whirlpool WWDC6410

    Hi John

    Thanks for that John, bloody Connect 😈


    12NC 859202415010

    Don

    July 24, 2014 at 1:51 pm #417075
    johnmac11
    Participant

    Re: Whirlpool WWDC6410

    Hi Don,

    Programmed board is 4810 104 08940
    blank board is 4801 111 04602

    If you want the service manual and parts listing send me you email by pm

    BTW When ordering Whirlpoool pcb’s look in the description and if it says “basic” then it will be a blank.


    John

    July 24, 2014 at 2:05 pm #417076
    don
    Moderator

    Re: Whirlpool WWDC6410

    Thanks very much John, I’ll get you a :beer: in March.


    Don

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.