LG auto F1222D5 paddle

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG auto F1222D5 paddle

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 28, 2014 at 9:21 am #81630
    asp11
    Participant

    Went to fit a drum paddle that a customer could not fit themselves BUT nor could I…
    The paddle just will not fit into the locating slits because its slightly too long, it touches the front inner part of the drum and will not locate!!

    Any ideas about this?

    July 28, 2014 at 8:36 pm #417232
    bazza500
    Participant

    Re: LG auto F1222D5 paddle

    The advice from LG was to cut half of each fixing tab off to fit the paddle or replace the inner drum.

    February 25, 2016 at 12:03 pm #417233
    bzz67
    Participant

    Re: LG auto F1222D5 paddle

    We just had one of these in our workshop for this job. We heated up the front end of the drum paddle using a heat gun set to 380’c, which made it just flexible enough to give when pulling against the drum allowing the clips to fit into the correct position. Job done :tup:

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.