beko dpu 8360w

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › beko dpu 8360w

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 18, 2014 at 4:11 pm #81886
    jimkilgour
    Participant

    my beko keeps tripping the electric supply off anybody got any ideas please help

    August 18, 2014 at 4:38 pm #418014
    electrofix
    Moderator

    Re: beko dpu 8360w

    there is a lot of things it could be but in a nutshell somewhere in the machine you have an earth fault

    could be water or dampness in the wrong place or a failing component like the motor or heater

    until an enginner looks at it you wont know

    Dave

    August 19, 2014 at 10:32 am #418015
    jimkilgour
    Participant

    Re: beko dpu 8360w

    the filter was completely blocked up with fine drying dust could that anything that may have caused this prob ? i have cleaned it completely now

    September 8, 2014 at 8:42 pm #418016
    Seamy
    Participant

    Re: beko dpu 8360w

    Completely blocked up filters or condenser does lead to poor airflow, which in turn leads to excess condensation/moisture not getting away, this can collect on electrical components and cause tripping.
    Need to get it looked at by an engineer who can test it for earth fault and replace the faulty component thats causing the problem.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.