NEFF S41M50S0GB/01 stopping

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › NEFF S41M50S0GB/01 stopping

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 18, 2014 at 7:43 pm #81890
    hilly
    Participant

    I replaced the heat pump on this dishwasher there was a wiring modification with the pump that I fitted and treble checked, I put it on a 30min wash and it does everything ok, drains, fills, washes and heats up but it just stops after about ten mins theres no error code and it stops counting down on the timer, it just sits there with water in, it will reset ok but just does the same again when started

    any pointers pls
    cheers paul

    August 19, 2014 at 7:34 am #418023
    rocker
    Participant

    Re: NEFF S41M50S0GB/01 stopping

    I changed one of theses some time ago I believe from memory there are 3 wires from NTC( which I fitted the wrong round), why don’t you try swapping them around just in case. hope this is helpful.

    August 19, 2014 at 7:40 am #418024
    rocker
    Participant

    Re: NEFF S41M50S0GB/01 stopping

    just an update the 3 cables must go back in the same order as they came off

    August 19, 2014 at 10:18 pm #418025
    hilly
    Participant

    Re: NEFF S41M50S0GB/01 stopping

    I was very careful to change them in order but anythings possible, it does seem like a temperature related problem, I’ll have a play
    Many thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.