Wash programs ended too early [Whirlpool ADP 5310]

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Wash programs ended too early [Whirlpool ADP 5310]

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 27, 2014 at 11:24 am #81989
    fam
    Participant

    Good afternoon,

    I have the dishwasher above mentioned, at the moment all machine wash programs ended about 1 minute after starting. The CANCEL/OFF indicator lamp blinks 6 times. It seems that the cycle begins correctly and when the machine starts to fill water the problem is detected. I have already checked the filters, hoses, water pressure and everything seems OK. I have also replaced the water input valve and the problem is not solved. I am thinking to change the flowmeter, but I do not know if it makes any sense.

    Can someone give an opinion?

    Thanks in advance.

    FAM

    September 1, 2014 at 8:23 am #418355
    fam
    Participant

    Re: Wash programs ended too early [Whirlpool ADP 5310]

    Good morning,

    In the meantime I have tested the resistance of water inlet valve, for checking its electrical condition. In resistance mode I have got 3.77 KOhm result and the continuity test gave me infinity reading.

    What can I conclude about water inlet valve condition with the above results?

    Thanks in advance,

    FAM

    September 9, 2014 at 1:20 pm #418356
    fam
    Participant

    Re: Wash programs ended too early [Whirlpool ADP 5310]

    Good afternoon,

    Problem solved, the solution was to replace the reed switch of 4 poles.

    I hope that information can help someone.

    FAM

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.