- This topic has 6 replies, 3 voices, and was last updated 11 years, 7 months ago by
.
-
Posts
-
Hello, I have really urgent problem.. I got American Style S25DRSS33 A/G frigde. Recently control board, which is behind fridge stopped working, consequently it just melted.. So I ordered new one, but now comes other problem. New board seems to be fine, unfortunately fridge is not cooling (freezer is), water does not come from where it suppose, ice maker is not working, and whatever you press on Display ir resets again. What is more, after like minute display shows CF error. Help ?
Re: [Urgent]Fridge does not work with new control board.
Normally if it doesn’t reach temperature then you won’t get water or ice.
Could be anything, compressor, front panel, a thermostat are all possibilities.
K.
Re: [Urgent]Fridge does not work with new control board.
Check the fan is working in the freezer.
Open the door and press and hold the light switch, if the compressor is running the fan should come on in the freezer.
If the fan works then it is the air defuser motor between the fridge and freezer will be the most likely fault as the plastic slide vent on the motor breaks.
Bob
Re: [Urgent]Fridge does not work with new control board.
SAMURI,
Freezer fan is working. But then how you explain other stuff? LIke display, ice maker and water, everything worked fine with old board.Re: [Urgent]Fridge does not work with new control board.
It may have blown the display PCB as well then if you cannot set it correctly.
Bob
- You must be logged in to reply to this topic.