- This topic has 1 reply, 2 voices, and was last updated 11 years, 7 months ago by
.
-
Posts
-
Hi,
Hoping someone out there knows a thing or two about Lamona Dishwashers coz I’m lost!
Our customer had someone else look at their D/W and they’d fitted a new board which hasn’t worked and are now ignoring her calls.
It’s a Lamona HJA8631 S/N: 11-516644-08 and the first and third program lights are flashing continuously. Those lights are marked ‘No Heat’ and ’50’. I found out how to run it through a test cycle which I did and it went through fine but when the cycle has finished and I turn the machine off and on again I still have the same two lights flashing and the buttons are unresponsive.
Any help on this is, as always, greatly appreciated.
Thanks in advance.Re: Lamona Dishwasher HJA8631
don’t know for sure but a few common issues:
1 door loom wires breaking
2 Burnt out microswitch on the float in the base+ reset procedure is quite long winded, need to get the start button on solid first and then hold it down till it flashes, shut door and let it re set.
- You must be logged in to reply to this topic.