How do I remove the front cover of a Bosch WFR2460 w/m

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › How do I remove the front cover of a Bosch WFR2460 w/m

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 1, 2005 at 1:47 pm #8211
    admin
    Keymaster

    I have a leaking drain pump which needs to be replaced. It seems easy enough to do, but I can’t get to the pump at the front of the machine. Obviously the front needs to come off, but unfortuneatly I can’t see how to do it. I’ve removed the kick board at the bottom without problem but I need to get behind the front panel to be able to get better access to the pump and hoses etc.

    Does anybody have a diagram or suggestion.

    Many Thanks.

    March 1, 2005 at 1:55 pm #127484
    PINKY
    Participant

    Re: How do I remove the front cover of a Bosch WFR2460 w/m

    remove the soap draw and undo the screw on the bottom right hand side. remove door seal strap and two screws holding the door lock. remove the three screws behind the kick plate. hold the front panel by the porthole, push down and lift off. hey presto one removed front panel!

    March 1, 2005 at 1:59 pm #127485
    admin
    Keymaster

    Re: How do I remove the front cover of a Bosch WFR2460 w/m

    Thanks for the quick reply. Remove the soap draw, obvious now, but I would never have thought of that.

    I’ll try this out tonight, many thanks again.. 😀 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.