- This topic has 4 replies, 2 voices, and was last updated 11 years, 7 months ago by
.
-
Posts
-
I need a door handle for one of the very early ISE-2 Vestel machines.
The original design was changed soon after they first went on sale and the service manual covers a few different machines but the handle shown in the service manual differs from the original and the one shown in the parts list THIS one is also different to the one shown on page 13 of the service manual.
The original handle was flat and almost rectangular and sat on the inside of the door trim.
This is the original facia, sadly the picture doesn’t show the handle and I had to destroy the broken one to get the door open. 😥
Re: ISE-2 Mk.1 handle
I have already e mailed Dave but he linked me to the one above, might have to be a complete door if we can get one.?
Re: ISE-2 Mk.1 handle
The one you’re after is the Thor style one which was only used on about 100 machines. Politics and styles, don’t ask.
It isn’t listed so no point looking for one but if I can dig one up all good. 😉
If not, if I can get the OPN then I can suss availability from wherever.
K.
- You must be logged in to reply to this topic.