vtd00 drum scraping – UK Whitegoods

This topic has 9 replies, 6 voices, and was last updated 11 years, 6 months ago by delta01.

Viewing 10 posts - 1 through 10 (of 10 total)

Author

Posts
September 11, 2014 at 3:08 pm #82200

delta01
Participant

Hi this dryer drum scrapes on back when it warms up i replaced the shaft and front and rear bearings even put two spacer washers on shaft, still doing it any one had a similar problem thanks

john

September 11, 2014 at 3:11 pm #419113

Martin
Participant

Re: vtd00 drum scraping

I bet the cabinet is twisted.

September 11, 2014 at 8:43 pm #419114

johnnyj
Participant

Re: vtd00 drum scraping

Must be an old drum if it needs spacing washers???

September 12, 2014 at 7:26 am #419115

delta01
Participant

Re: vtd00 drum scraping

Thanks Guys if cabinet twisted may be i can fit a bracket across one corner

September 17, 2014 at 7:55 pm #419116

HotDog
Participant

Re: vtd00 drum scraping

you need the new drum mod

September 18, 2014 at 7:42 am #419117

delta01
Participant

Re: vtd00 drum scraping

do you have a part no please

September 18, 2014 at 8:30 am #419118

iadom
Moderator

Re: vtd00 drum scraping

Complete drum kit mod is C00145650, you must fit the 16mm rear foam seal in place of the original 26mm seal.

September 18, 2014 at 5:10 pm #419119

delta01
Participant

Re: vtd00 drum scraping

thanks v much all

September 18, 2014 at 5:14 pm #419120

Martin
Participant

Re: vtd00 drum scraping

delta01 wrote:thanks v much all

I wouldn’t mind betting this one is heading for environmental disposal. 😉

September 18, 2014 at 10:02 pm #419121

AMS
Participant

Re: vtd00 drum scraping

Martin wrote:
I wouldn’t mind betting this one is heading for environmental disposal. 😉

Best place for them – absolute garbage.
Author

Posts

Viewing 10 posts - 1 through 10 (of 10 total)

You must be logged in to reply to this topic.