Beko WMB71231-B

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB71231-B

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 23, 2014 at 7:35 pm #82333
    rocker
    Participant

    The machine takes in water but no drum action, On draining it drains for say 4 seconds then nothing have to keep resetting until it empties tub.
    Possible a Pcb fault. !! any advice please.

    September 24, 2014 at 7:22 pm #419543
    Seamy
    Participant

    Re: Beko WMB71231-B

    on off switch in off position, select cottons (first program’), holding in start button, switch on at on/off switch, it should throw up an error code, post this here & hopefully someone will help you. otherwise check pressure vessel, brushes, heater etc

    September 25, 2014 at 7:09 am #419544
    rocker
    Participant

    Re: Beko WMB71231-B

    Thanks Seamy, will check these out. John

    September 25, 2014 at 7:49 pm #419545
    Bluephill
    Participant

    Re: Beko WMB71231-B

    I would say the DC Module is a likely candidate.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.