- This topic has 1 reply, 2 voices, and was last updated 11 years, 6 months ago by
.
-
Posts
-
Seamy wrote:Sensor should read between 4200ohms (15c) – 3500ohms (20c) at room temp’. If its faulty most of them are repairable but its a rewire job fitting kit in place of original.
Most common fault on these are the fan not running which causes no transfer of cold air up to fridge from freezer section. Many of them the fan can only be replaced by replacing the evaporator battery which entails refrigeration regassing etc.
Make sure freezer door is closed, fan won’t run with door open 😉Hi
I have split your trade post away from the public one you attached it to. More help available here in the trade forums 😉
Don
I’ve got the same fault but the fan is running. Any idea of the part number for this sensor? I can’t find it in ProCorner.Thanks
Re: Electrolux fridge freezer sensor damaged JLSS 1808 / 9
Clive Braham wrote:Any idea of the part number for this sensor? I can’t find it in ProCorner.
You will need to read Service Bulletin 599745615 on Procorner and look up the service kit that relates to the PNC number of your appliance. It’s not and Electrolux by the way but a branded John Lewis. So try looking under John Lewis once you have established the complete PNC number. 💡
- You must be logged in to reply to this topic.